BGCDH - EPOXY CLEAR
- MSDS: BGCDH
- Manufacturer: CON LUX COATINGS INC
- Product Name: EPOXY CLEAR
- National Stock Number: 8010-00-990-8256
Product Identification
Product ID:EPOXY CLEAR
MSDS Date:01/01/1985
FSC:8010
NIIN:00-990-8256
Kit Part:Y
MSDS Number: BGCDH
Responsible Party
EDISON, NJ 08818-0847
US
Cage: 6A064
Contractor
Telephone: 908-287-4000
Cage: 6A064
Ingredients
XYLENES (O-,M-,P- ISOMERS) (SARA III)
CAS: 1330-20-7
RTECS: ZE2100000
Fraction By Weight: 29.0%
OSHA PEL 100 PPM/150 STEL
ACGIH TLV: 100 PPM/150STEL;9192
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
OYGENATED SOLVENT
Fraction By Weight: 20.0%
ACGIH TLV: 25 PPM (MFG)
DIMETHYLAMINOMETHYL PHENOL
Fraction By Weight: 0.75%
Hazards
Effects of Overexposure:DRYING OF SKIN; EYE IRRIT;
INH:(EXCESSIVE)ANESTHESIA, HEADACHE, DIZZ, NAUSEA, UPPER RESP
IRRIT.
First Aid
First Aid:INH:REMOVE TO FRESH AIR, APPLY ARTIFICIAL RESPIRATION AS
NECESSARY, CALL A PHYSICIAN. SKIN:WASH W/MILD SOAP & WATER, IN
SEVERE CASES CALL PHYSICIAN. EYE: FLUSH W/WATER, CALL A PHYSICIAN.
Fire Fighting
Flash Point:80F TCC
Lower Limits:2.6
Extinguishing Media:CO*2, DRY CHEMICAL
Fire Fighting Procedures:WATER SPRAY MAY BE INEFFECTIVE. USE WATER TO
COOL CONTAINERS
Unusual Fire/Explosion Hazard:.
CAN BE IGNITED AT ALMOST ALL TEMPERATURES.
Accidental Release
Spill Release Procedures:FLUSH W/WATER INTO RETAINING AREA OR
CONTAINER. AVOID SPARKS, FIRE, OR HOT METAL. SM QTY MAY BE ABSORBED
ONTO AN APPROPRIATE ABSORBENT.
Handling
Handling and Storage Precautions:KEEP COOL & AWAY FROM SOURCES OF
IGNITION. USE W/ADEQUATE VENTILATION. AVOID PROLONGED OR REPEATED
PERSONAL CONTACT. DO NOT STORE ABOVE 100F.
Other Precautions:DOT:FLAMMABLE LIQUID.
Exposure Controls
Respiratory Protection:ABOVE TLV, USE CARTRIDGE RESPIRATOR OR GAS MASK.
Ventilation:SUFFICIENT TO KEEP TLV BELOW ACCEPTABLE LIMIT.
Protective Gloves:IMPERMEABLE
Eye Protection:CHEMICAL GOGGLES
Other Protective Equipment:APRON, BARRIER CREME
Supplemental Safety and Health
VAPOR PRESSURE: 9.5.KEY1:F4.
Chemical Properties
HCC:F4
Boiling Pt:B.P. Text:248F
Vapor Density:3.60
Spec Gravity:0.9700
Evaporation Rate & Reference:<1.0 (ETHER)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:CLEAR LIQUID - MILD CHARACTERISTIC ODOR.
Percent Volatiles by Volume:53.0
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:HEAT, SPARKS, OPEN FIRES.
Hazardous Decomposition Products:CARBON MONOXIDE - FROM THERMAL
DECOMPOSITION.
Disposal
Waste Disposal Methods:INCINERATE UNDER SAFE CONDITIONS OR DISPOSE OF
IN ACCORDANCE W/APPLICABLE FED., STATE & LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.